Add support for OV5640 camera #3063

jasaw · 2024-05-06T02:32:24Z

Add support for OV5640 5MP camera. The camera has a resolution of 2560 x 1920 but the output will be scaled down to the configured resolution e.g. 640 x 480. When zoom is enabled, a 640 x 480 window is cropped from the full 2560 x 1920 frame, therefore giving double the magnification compared to OV2640.

This is a zoom comparison between OV5640 and OV2640.

OV5640:

OV2640:

caco3 · 2024-05-06T16:18:59Z

what is the impact on the RAM usage?
Does it need to store a larger framebuffer for the higher resolution?

jasaw · 2024-05-06T22:12:50Z

@caco3 There's no impact on RAM usage at all. It works the same way as ov2640 where cropping is done on the camera module itself.

SybexX · 2024-05-06T22:32:04Z

Process:

The camera takes an image with a resolution of 2560x1920
The camera cuts out the desired area from the image
The camera scales the cropped area to 640x480, if needed (desired area is larger 640x480)
This process applies both when using the zoom function and when zoom is deactivated.

However, further changes to the implementation are necessary, e.g. at the sharpness....

Ablauf:

Die Kamera nimmt ein Bild mit einer Auflösung von 2560x1920 auf
Die Kamera schneidet den gewünschten Bereich aus dem Bild aus
Die Kamera skaliert den ausgeschnittenen Bereich bei Bedarf auf 640x480 (wenn der ausgeschnittene Bereich größer 640x480 ist).
Dieser Ablauf wird sowohl bei der Nutzung der Zoom-Funktion als auch bei deaktivierten Zoom benutzt/verwendet.

Allerdings sind noch weitere Änderungen an der Implementierung notwendig, z.B. bei sharpness.....

jasaw · 2024-05-07T00:23:19Z

However, further changes to the implementation are necessary

@SybexX May I know what you would like to change?

SybexX · 2024-05-07T07:29:09Z

e.g. so:

I made a few quick adjustments, but I don't know if it works because I don't have an OV5640.
ClassControllCamera.zip

jasaw · 2024-05-09T03:05:53Z

@SybexX I've adjusted the sharpness handling to your version and it's working fine on my OV5640 system. I changed the sharpness range because the officially supported sharpness range is from -3 to +3.
_sharpnessLevel = min(2, max(-2, _sharpnessLevel));

Your ClassControllCamera code enforces 4:3 ratio on the zoom parameters, but OV5640 is a lot more flexible. It doesn't have the 4:3 restriction. Currently this PR only supports zoom mode 0, but it might be possible to achieve other zoom modes by passing different parameters to set_res_raw with scaling and binning set to true. That needs more experimentation, which I think could be left for future enhancement.

SybexX · 2024-05-09T09:08:04Z

I specifically set the sharpnessLevel to 2.
After longer tests, I found that a value of 3 sometimes causes problems.

I know that the OV5640 can do more, but we should adapt everything to the OV2640,
otherwise we would need at least two pages, i.e. one for each camera model and it simply becomes too confusing for the user.

Sometimes less is more^^

SybexX · 2024-05-09T09:22:40Z

jasaw · 2024-05-09T12:21:40Z

@SybexX Thank you for reviewing. I've refactored my code based on your sample code but had to make a few changes to make it work with the OV5640.

only else, otherwise the other supported camera models will be ignored

My apologies, it is not clear to me that OV3660 (which is the other supported camera) behaves the same way as OV2640 and parts of the code are hitting the OV2640 registers directly (presumably the OV3660 has the same registers as OV2640?). Personally, I prefer to be more explicit in the code when it comes to handling hardware specific behaviour, like

if (sensor_info->model == CAMERA_OV5640)
{
}
else if ((sensor_info->model == CAMERA_OV2640) || (sensor_info->model == CAMERA_OV3660))
{
}

Either way, I am not particular with how the code is written as long as it is well documented via comments or code itself so other developers understand the intention of the author.

SybexX · 2024-05-09T14:11:56Z

The registers don't matter, the properties of the camera are more important.
The https://github.com/espressif/esp32-camera relieves us of having to pay attention to the registers.
Since no distinction was made between the camera models before I made my changes, I assumed that the OV2640 and OV3660 were very similar. After I quick look, the OV3660 is very close to the OV5640 in terms of functions.

jasaw · 2024-05-09T14:42:16Z

The registers don't matter

ov2640_set_sharpness and ov2640_enable_auto_sharpness functions are called for OV3660 camera as well and eventually those functions call sensor->set_reg which writes directly to the OV3660's registers. Keep in mind that OV2640 sharpness is not officially supported by Espressif SDK. I haven't looked into the OV3660 datasheet, so I don't know what the camera will do if those registers don't exist or worse, have a different function. I don't have an OV3660 to test, so can't validate.

Since no distinction was made between the camera models before I made my changes, I assumed that the OV2640 and OV3660 were very similar

That was an oversight on my part as well. We should probably test sharpness against OV3660 and update the code accordingly?

SybexX · 2024-05-09T14:50:09Z

If something is not available on a camera model, the esp32-camera library actually returns a -1

https://github.com/espressif/esp32-camera/blob/master/sensors/ov2640.c
https://github.com/espressif/esp32-camera/blob/master/sensors/ov3660.c
https://github.com/espressif/esp32-camera/blob/master/sensors/ov5640.c

jasaw · 2024-05-09T15:11:07Z

I propose this sharpness handling code:

void CCamera::SetCamSharpness(bool _autoSharpnessEnabled, int _sharpnessLevel)
{
    sensor_t *s = esp_camera_sensor_get();

    if (s != NULL)
    {
        _sharpnessLevel = min(2, max(-2, _sharpnessLevel));

        camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&(s->id));

        if (sensor_info != NULL)
        {
            if (sensor_info->model == CAMERA_OV5640 || sensor_info->model == CAMERA_OV3660)
            {
                if (_autoSharpnessEnabled)
                {
                    // autoSharpness is not supported, default to zero
                    s->set_sharpness(s, 0);
                }
                else
                {
                    s->set_sharpness(s, _sharpnessLevel);
                }
            }
            else if (sensor_info->model == CAMERA_OV2640)
            {
                // The OV2640 does not officially support sharpness, so the detour is made with the ov2640_sharpness.cpp.
                if (_autoSharpnessEnabled)
                {
                    s->set_sharpness(s, 0);
                    ov2640_enable_auto_sharpness(s);
                }
                else
                {
                    ov2640_set_sharpness(s, _sharpnessLevel);
                }
            }
        }
    }
    else
    {
        LogFile.WriteToFile(ESP_LOG_ERROR, TAG, "SetCamSharpness, Failed to get Cam control structure");
    }
}

jasaw · 2024-05-09T15:24:17Z

@SybexX Looks like OV3660 set_res_raw function is the same as OV5640 as well. I should probably handle OV3660 explicitly.

SybexX · 2024-05-09T15:25:13Z

or so, then the ESP is spared the second comparison ^^

void CCamera::SetCamSharpness(bool _autoSharpnessEnabled, int _sharpnessLevel)
{
sensor_t *s = esp_camera_sensor_get();

if (s != NULL)
{
    _sharpnessLevel = min(2, max(-2, _sharpnessLevel));

    camera_sensor_info_t *sensor_info = esp_camera_sensor_get_info(&(s->id));

    if (sensor_info != NULL)
    {
        if (sensor_info->model == CAMERA_OV2640)
        {
            // The OV2640 does not officially support sharpness, so the detour is made with the ov2640_sharpness.cpp.
            if (_autoSharpnessEnabled)
            {
                s->set_sharpness(s, 0);
                ov2640_enable_auto_sharpness(s);
            }
            else
            {
                ov2640_set_sharpness(s, _sharpnessLevel);
            }
        }
        else
        {
			// for CAMERA_OV5640 and CAMERA_OV3660
            if (_autoSharpnessEnabled)
            {
                // autoSharpness is not supported, default to zero
                s->set_sharpness(s, 0);
            }
            else
            {
                s->set_sharpness(s, _sharpnessLevel);
            }
        }			
    }
}
else
{
    LogFile.WriteToFile(ESP_LOG_ERROR, TAG, "SetCamSharpness, Failed to get Cam control structure");
}

}

SybexX · 2024-05-09T15:37:30Z

        if (sensor_info->model == CAMERA_OV2640)
        {
            // The OV2640 does not officially support sharpness, so the detour is made with the ov2640_sharpness.cpp.
            if (_autoSharpnessEnabled)
            {
                s->set_sharpness(s, 0);	<<<<<<<<<< oh yes, this is actually not necessary, as it only returns a -1(not supported)
                ov2640_enable_auto_sharpness(s);
            }
            else
            {
                ov2640_set_sharpness(s, _sharpnessLevel);
            }
        }

jasaw · 2024-05-09T15:52:33Z

@SybexX I have updated the code to your suggested sharpness handling and also updated zoom handling code to better deal with OV3660 but I don't have an OV3660 so can't test. I have only tested with OV5640 so far.

SybexX · 2024-05-09T16:31:06Z

            case CAMERA_OV5640:
                frameSizeX = 2560;
                frameSizeY = 1920;
                // max imageSize = ((frameSizeX - CCstatus.ImageWidth) / 8 / 4) - 1
                // 59 = ((2560 - 640) / 8 / 4) - 1
                if (imageSize < 59)
                {
                    _imageSize_temp = (59 - imageSize);
                }
                SanitizeZoomParams(_imageSize_temp, frameSizeX, frameSizeY, _imageWidth, _imageHeight, _offsetx, _offsety);
                SetCamWindow(s, unused, frameSizeX, frameSizeY, _offsetx, _offsety, _imageWidth, _imageHeight, CCstatus.ImageWidth, CCstatus.ImageHeight);
                break;

            case CAMERA_OV3660:
                frameSizeX = 2048;
                frameSizeY = 1536;
                // max imageSize = ((frameSizeX - CCstatus.ImageWidth) / 8 / 4) -1
                // 43 = ((2048 - 640) / 8 / 4) - 1
                if (imageSize < 43)
                {
                    _imageSize_temp = (43 - imageSize);
                }
                SanitizeZoomParams(_imageSize_temp, frameSizeX, frameSizeY, _imageWidth, _imageHeight, _offsetx, _offsety);
                SetCamWindow(s, unused, frameSizeX, frameSizeY, _offsetx, _offsety, _imageWidth, _imageHeight, CCstatus.ImageWidth, CCstatus.ImageHeight);
                break;

            case CAMERA_OV2640:
                // ov2640_sensor_mode_t _mode = OV2640_MODE_UXGA; // 1600x1200
                // ov2640_sensor_mode_t _mode = OV2640_MODE_SVGA; // 800x600
                // ov2640_sensor_mode_t _mode = OV2640_MODE_CIF;  // 400x296
                _mode = 0;
                frameSizeX = 1600;
                frameSizeY = 1200;
                // max imageSize = ((frameSizeX - CCstatus.ImageWidth) / 8 / 4) -1
                // 29 = ((1600 - 640) / 8 / 4) - 1
                if (imageSize < 29)
                {
                    _imageSize_temp = (29 - imageSize);
                }
                SanitizeZoomParams(_imageSize_temp, frameSizeX, frameSizeY, _imageWidth, _imageHeight, _offsetx, _offsety);
                // _mode sets the sensor resolution (3 options available),
                // _offsetx and _offsety set the start of the ROI,
                // _imageWidth and _imageHeight set the size of the ROI,
                // CCstatus.ImageWidth and CCstatus.ImageHeight set the output window size.
                SetCamWindow(s, _mode, frameSizeX, frameSizeY, _offsetx, _offsety, _imageWidth, _imageHeight, CCstatus.ImageWidth, CCstatus.ImageHeight);
                break;

jasaw · 2024-05-10T00:52:25Z

@SybexX The new imageSize code that you shared above appears to be working well on my OV5640 setup and thanks for adding the comments to explain how the imageSize numbers came from because I had no idea previously.

I've also increased the OV5640 full frame size to match the datasheet.

SybexX · 2024-05-11T16:39:13Z

still necessary adjustment in the edit_reference.html:

        <td>
                <input required type="number" id="TakeImage_CamZoomSize_value1" value="0" min="0" max="59" step="1" onchange="cameraParameterChanged()"
                oninput="(!validity.rangeOverflow||(value=59)) && (!validity.rangeUnderflow||(value=0)) && (!validity.stepMismatch||(value=parseInt(this.value)));">
        </td>

still necessary adjustment in the edit_config_template.html:

		<td>
			<input required type="number" id="TakeImage_CamZoomSize_value1" value="0" min="0" max="59" step="1" onchange="cameraParameterChanged()"
			oninput="(!validity.rangeOverflow||(value=59)) && (!validity.rangeUnderflow||(value=0)) && (!validity.stepMismatch||(value=parseInt(this.value)));">
		</td>
		<td>$TOOLTIP_TakeImage_CamZoomSize</td>			
	</tr>

	<tr class="expert" unused_id="TakeImage_CamZoomOffsetX_ex3">
		<td class="indent1">
			<class id="TakeImage_CamZoomOffsetX_text" style="color:black;">Zoom Offset X</class>
		</td>
		<td>
			<input required type="number" id="TakeImage_CamZoomOffsetX_value1" value="0" min="-960" max="960" step="8" onchange="cameraParameterChanged()"
			oninput="(!validity.rangeOverflow||(value=960)) && (!validity.rangeUnderflow||(value=-960)) && (!validity.stepMismatch||(value=parseInt(this.value)));">Pixel
		</td>
		<td>$TOOLTIP_TakeImage_CamZoomOffsetX</td>
	</tr>

	<tr class="expert" unused_id="TakeImage_CamZoomOffsetY_ex3">
		<td class="indent1">
			<class id="TakeImage_CamZoomOffsetY_text" style="color:black;">Zoom Offset Y</class>
		</td>
		<td>
			<input required type="number" id="TakeImage_CamZoomOffsetY_value1" value="0" min="-720" max="720" step="8" onchange="cameraParameterChanged()"
			oninput="(!validity.rangeOverflow||(value=720)) && (!validity.rangeUnderflow||(value=-720)) && (!validity.stepMismatch||(value=parseInt(this.value)));">Pixel
		</td>
		<td>$TOOLTIP_TakeImage_CamZoomOffsetY</td>
	</tr>

jasaw · 2024-05-27T01:26:16Z

@SybexX

Can you try out whether the following changes eliminate the red coloring when you have vertical flip activated?
Does your OV5640 with auto focus also have the same problems with vertical flip?

The config order changes does not fix the vertical flip red colour problem for me. Both my normal OV5640 and OV5640 autofocus behave the same way. From I can tell, the autofocus version behaves exactly the same way as the normal OV5640 in every way, except it has the autofocus VCM circuit attached at the side.

I changed something regarding gainceiling because it didn't work properly with the OV5640

Good catch. Gain ceiling is a little hard to test because it only kicks in after it has reached maximum exposure level and the datasheet is not exactly clear that the gain ceiling registers take real value rather than enum. The espressif library gets it wrong, so would be nice to upstream your fix.

SybexX · 2024-05-28T11:23:52Z

@jasaw It might be an advantage if you put something like this in the AI-on-the-edge-device/param-docs/parameter-pages/TakeImage/CamVflip.md:

!!! On some OV5640 Cameras, the image becomes reddish when Vflip is used in conjunction with the zoom function!

To avoid countless inquiries/reports.

jasaw · 2024-06-03T01:34:43Z

@SybexX I've updated the vflip param page and resolved merge conflict.

jasaw · 2024-07-12T05:47:37Z

I've been running my OV5640 for some time now. It is working well for me. Can we merge this in?

caco3 · 2024-08-25T19:28:33Z

@SybexX Is this something we should add to the official firmware?
@jasaw can you please fix the conflicts?

SybexX · 2024-08-26T12:05:52Z

@caco3 yes, I would like to have this in there too.
It works as it should, does not consume any additional resources compared to the ov2640 and expands the supported hardware.

jasaw · 2024-08-26T15:32:00Z

I've resolved the merge conflicts, but haven't eyeballed the merged code line by line to make sure everything merged correctly. I haven't tested the firmware. I'll OTA upgrade to my OV5640 system tomorrow.

caco3 · 2024-08-26T15:49:59Z

OK, that sounds great.
We should add this to the new release and mention it clearly as this a large enhancement -> readme, documentation, release notes, ...
@jasaw since you are a core user of it, please test it it works as needed.

SybexX · 2024-08-26T16:38:58Z

I tested it with an ov2640 and ov5640 and I didn't notice any errors/problems.
Let's see what @jasaw says when he tests it.

jasaw · 2024-08-28T17:03:30Z

I've been running this firmware for more than a day now and it's working as expected.

Pferdebockwurst · 2024-09-14T17:04:17Z

Very nice to see some progress regarding the cameras. Can you recommend one of them? Is one of the new supported models better than the other one? Is autofocus important? Thanks a lot guys!

jasaw · 2024-09-18T02:33:53Z

@Pferdebockwurst Auto focus is NOT supported yet and auto focus also requires some soldering on most ESP32Cam boards. If you don't solder wires, it's still safe to use OV5640 modules with auto focus. The auto focus circuitry is completely separate from the OV5640.
I bought my OV5640 with and without auto focus from 3 different sellers on AliExpress and they're all working fine for me, so maybe any one will work as long as it's advertised to work with ESP32Cam?

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update Changelog.md * cleanup --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com>

* Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: #3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update #3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in 33893eb but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested #3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4f. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> * revert TFlite submodule update as certain modules crash with it, see #3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html #3284 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * fix pipeline * Update build.yaml --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com>

* fix pipeline (#3294) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> * revert TFlite submodule update as certain modules crash with it, see https://github.com/jomjol/AI-on-the-edge-device/issues/3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html https://github.com/jomjol/AI-on-the-edge-device/issues/3284?notification_referrer_id=NT_kwDOAAj1wbIxMjY3MDI1Njk3MDo1ODcyMDE#issuecomment-2387102786 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com> * update pipeline (#3296) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: michael <Heinrich-Tuning@web.de> * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update Changelog.md * Update Changelog.md * Prepare next release (#3267) (#3270) * Create dig-cont_0640_s3_q.tflite * Update edit_reference.html (#2924) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist * Update edit_config_template.html (#2925) Zoom-Einstellungen ausblenden, wenn zoom deaktiviert ist + Kameraeinstellungen nicht nur in der config.ini speichern, sondern auch setzen * The parameter "negative" is processed on the MCU * Renamed menu entry Alignment -> References * renamed model file to make naming consistent * Fix test (#2933) * always reset change absolute (#2956) * Create dig-class11_1701_s2.tflite * Update tflite * Update tflite * Camera settings (#3029) * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Add files via upload * Fix minor typo and harmonize spaces (#3030) * Update edit_digits.html * Update edit_analog.html * Update overview.html * Update edit_reference.html --------- * Source code formatting, ClassFlowPostProcessing.cpp * fix edit_config_template.html Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix readconfigparam.js Unfortunately, I didn't take out some entries from other experiments because I overlooked/forgot them^^ * fix edit_config_template.html TakeImage_CamZoomMode_value1 was replaced by TakeImage_CamZoomSize_value1, but not deleted. This caused problems when saving the camera settings. * Update info.html function loadWLANSSID() was present three times * Update overview.html CamFrameSize is no longer needed/used for zoom * Update reply-bot.yaml * homeassistant service discovery: derive node_id when using nested topics (#3088) * derive correct node_id for homeassistant service discovery in nested topics (fixes #1792) * explicit use of std::string * move nodeId creation to separate function add unit-tests * add documentation about node_id generation for Home Assistant MQTT Service Discovery * add Prometheus/OpenMetrics exporter (#3081) * add prometheus endpoint * refine metrics implementation * move metrics generator to ClassFlowControll * add more metrics align prefix * add more metrics clean up * refine documentation * revert dependencies change * sanitize labels * create separate module for openmetrics * move openmetrics to separate folder * clean up * add basic unit-tests * work with const numbers add replaceAll for string replacement avoid opening std namespace adapt unit-tests * Update code/main/server_main.cpp --------- * Typo * update platformIO to 6.7.0 (ESP IDF 5.2.1) (#3098) * update to platformio/espressif32 @ 6.7.0 * remove unused getReadout() as it throws errors (error: 'virtual std::string ClassFlow::getReadout()' was hidden). --------- * Update reply-bot.yaml (#3107) * Fix actions-label-commenter * Update Helper.cpp * Update Helper.h * Update Helper.cpp * Update readconfigparam.js fix for: In the selected field the value '1' in the section 'TakeImage' in the field 'CamGainceiling' is invalid. PLEASE CHECK BEFORE SAVING! * proposal for renaming and documentation (#3115) * Update server_camera.cpp Fix building with -D DEBUG_DETAIL_ON better alternative to: https://github.com/jomjol/AI-on-the-edge-device/pull/3160 * Update ClassFlowPostProcessing.cpp * Update ClassFlowAlignment.cpp * Fix building with `-D DEBUG_DETAIL_ON` (#3160) Building with `-D DEBUG_DETAIL_ON` has been broken since #3029. * Handle empty prevalue.ini gracefully (#3162) Fixes #2149. * Bugfix for boot loop (#3175) * Add files via upload * Add files via upload * Add files via upload * Delete param-docs/parameter-pages/TakeImage/Aec2.md has been replaced by CamAec2.md * Delete param-docs/parameter-pages/TakeImage/AutoExposureLevel.md has been replaced by CamAeLevel.md * Delete param-docs/parameter-pages/TakeImage/Brightness.md has been replaced by CamBrightness.md * Delete param-docs/parameter-pages/TakeImage/Contrast.md has been replaced by CamContrast.md * Delete param-docs/parameter-pages/TakeImage/Grayscale.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Negative.md has been replaced by CamSpecialEffect.md * Delete param-docs/parameter-pages/TakeImage/Saturation.md has been replaced by CamSaturation.md * Delete param-docs/parameter-pages/TakeImage/Sharpness.md has been replaced by CamSharpness.md * Delete param-docs/parameter-pages/TakeImage/ImageQuality.md has been replaced by CamQuality.md * Delete param-docs/parameter-pages/TakeImage/Zoom.md has been replaced by CamZoom.md * Delete param-docs/parameter-pages/TakeImage/ZoomMode.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetX.md has been replaced by CamZoomOffsetX.md * Delete param-docs/parameter-pages/TakeImage/ZoomOffsetY.md has been replaced by CamZoomOffsetY.md * Delete param-docs/parameter-pages/TakeImage/ImageSize.md has been replaced by CamZoomSize.md * Delete param-docs/parameter-pages/TakeImage/FixedExposure.md has been replaced by CamAec.md * Delete param-docs/parameter-pages/Alignment/FlipImageSize.md has been replaced by CamVflip.md * Delete param-docs/parameter-pages/Alignment/InitialMirror.md has been replaced by CamHmirror.md * CamParameter documentation update https://github.com/jomjol/AI-on-the-edge-device/issues/3185 * typo * add Webhook #3148 (#3163) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error --------- * Bugfix for time stamp (#3180) * Update ClassFlowPostProcessing.cpp * Update ClassFlowDefineTypes.h * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update ClassFlowPostProcessing.cpp * Update interface_webhook.cpp * Update readconfigcommon.js fix for: The same message("Image Contrast got enhanced") came up with "Update Marker" and "Enhance Image Contrast". * fix svg favicon The svg one got added in https://github.com/jomjol/AI-on-the-edge-device/commit/33893eb566382ee228dfb791781b3a497c7c5e07 but does not work on Firefox * Update platformIO to 6.8.1 (Contains ESP IDF 5.3) (#3196) * Update platformIO to 6.8.1 (ESP IDF 5.3) * removed now redundant typedef * updated IDF manifest hash * Add files via upload so it should work now * Update server_main.cpp --------- * Update MainFlowControl.cpp * Add support for OV5640 camera (#3063) * Add support for OV5640 camera * clean up sharpness handling * limit sharpness range to -2 and +2 * refactor * Fix OV3660 sharpness handling * refactor sharpness handling * fix OV3660 zoom mode * reinstate aspect ratio via imageSize * Changed OV5640 full frame size to match datasheet * various fixes * add denoise config and general clean up * fix line endings to LF * Support enabling red blue swap via web interface * update jpeg quality limits * remove color swap config; color swap workaround dependent on vflip * fix missing commit * fix gain ceiling * Update cam vflip param page * fix typo: camdenoise, not camsdenoise * fix compile errors * Update MainFlowControl.cpp * Add rate threshold parameter (#3195) * still needs to be tested https://github.com/jomjol/AI-on-the-edge-device/issues/3143 * Update ClassFlowPostProcessing.cpp code formatting * Update ClassFlowDefineTypes.h code formatting * Update ClassFlowPostProcessing.h code formatting * Update edit_config_template.html * fix * Update config.ini * Update edit_config_template.html * Updated param doc * Rename parameters * Update edit_config_template.html * Update NUMBER.ChangeRateThreshold.md * Update NUMBER.ChangeRateThreshold.md --------- * Update main.cpp * Update config.ini Adjusted camera settings to make the image brighter. * Update readconfigparam.js Adjusted camera settings to make the image brighter. * add optional ImageUpload for Webhook (#3174) * WIP add Webhook * fix config html for webhook add tooltips for webhook * webhook: fix not enabling webhook * send webhook as json * Update ApiKey.md * webhook: fix only sending last "Number" * webhook JSON is now closer to the data log in CSV format * webhook: add img upload * webhoop added config for imgupload * webhook html fixes * webhook: drop timeStampTimeUTC and switch from timeStamp to lastvalue like lokal csv to fix no timestamp on error * add checkbox for Webhook_UploadImg * Update sd-card/html/edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * Update edit_config_template.html * added a long timestamp to both webhook requests --------- * Add files via upload (#3207) * Update ClassFlowPostProcessing.cpp deleted some unnecessary double entries RateType renamed to MaxRateType * Update ClassFlowDefineTypes.h RateType renamed to MaxRateType * Update text on recognition page * Update digital CNN * add a Delay between the WiFi reconnections (#3068) * add a Delay between the WiFi reconnections * log the delay between the WiFi reconnections move the delay after the log * cleanup * cleanup * cleanup * Update edit_alignment.html * cleanup * cleanup * Update platformIO to 6.9.0 (Contains ESP IDF 5.3.1) * Handle crash on corrupted model (#3220) * Upgrade esp-tflite-micro to 1.3.1 * Added log message to hint in case it crashes on loading a corrupted model --------- * new dig-class100-173-s2-q on 23.800 images (#3257) * new dig-class100-173-s2-q on 23.800 images * platformio/espressif32 @ 6.8.1 for esp32cam-dev * Revert "platformio/espressif32 @ 6.8.1 for esp32cam-dev" This reverts commit cc9297d483a0cdc5048e1738735693bb80a23a04. * not using platformio 6.1.16 * Revert "not using platformio 6.1.16" This reverts commit ef18e4fae7f6a73013080110fa1c21f4cc2b06ec. * moved number edit box styles into new file edit_style.css (#3262) changed input[type=number] from 60px to 3em, to show 3 digits with current font size. * added note about only TLS 1.2 is supported (#3213) * Renamed digital to digit (#3219) * renamed Digital to Digit * added param migration * Update .github/label-commenter-config.yaml * renamed AnalogDigitTransition* to AnalogToDigitTransition* --------- * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> * revert TFlite submodule update as certain modules crash with it, see https://github.com/jomjol/AI-on-the-edge-device/issues/3269 * Rename NUMBER.AnalogDigitTransitionStart.md to NUMBER.AnalogToDigitTransitionStart.md * Update NUMBER.AnalogToDigitTransitionStart.md * Update edit_config_template.html * changed the webhook UploadImg to false * changed the webhook UploadImg to false (#3279) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show boolean option in settings page (#3285) * changed the webhook UploadImg to false * show boolean value on boolean drop down boxes --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * changed default value from boolean to numeric value in parameter camDenoise documentation * Update edit_explain_7.html https://github.com/jomjol/AI-on-the-edge-device/issues/3284?notification_referrer_id=NT_kwDOAAj1wbIxMjY3MDI1Njk3MDo1ODcyMDE#issuecomment-2387102786 * docs: update README.md (#3290) prefered -> preferred * rename/remove unused parameters (#3291) * migrate-cam-parameters (#3288) * Update main.cpp * remove commented out code --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> * Update Changelog.md * cleanup * Skip release jobs on non-release changes * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * fix pipeline * Update build.yaml --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com> --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: michael <Heinrich-Tuning@web.de> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: kub3let <95883234+kub3let@users.noreply.github.com> Co-authored-by: Marco H <myxor@users.noreply.github.com> Co-authored-by: Henry Thasler <henrythasler@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Sebastian Lövdahl <slovdahl@hibox.fi> Co-authored-by: Raphael Hehl <raphael@rhehl.de> Co-authored-by: jasaw <jasaw@dius.com.au> Co-authored-by: Francesco Carnielli <hex7c0@gmail.com> Co-authored-by: kalwados <kalwados@gmx.de> Co-authored-by: Ikko Eltociear Ashimine <eltociear@gmail.com>

Slider0007 · 2024-11-11T19:43:20Z

@jasaw, @SybexX
I'm not sure if the issue with tinted image is solved already, but during my last activities I also faced the tinted image issue from time to time. Ensure that only an odd offset is provided, solved it for me - at least with my camera. I have only one OV5640 camera therefore I cannot say if this is transferable or the issue here is something different. Just let you know...

SybexX · 2024-11-11T20:17:58Z

@Slider0007 Unfortunately the problem could not be solved.
We also noticed the issue with the offset, but it didn't help solve this problem.
What worked for me caused a problem for jasaw and vice versa.
Therefore I suspect that it has something to do with the camera's firmware.
Therefore, a note about this was added to the Tooltip.

Add support for OV5640 camera

f112993

jasaw mentioned this pull request May 6, 2024

Support for OV5640 #2162

Open

clean up sharpness handling

d6741fe

jasaw added 2 commits May 9, 2024 22:07

limit sharpness range to -2 and +2

8a0da95

refactor

b9c94f6

Fix OV3660 sharpness handling

9099477

jasaw added 2 commits May 10, 2024 01:47

refactor sharpness handling

d093d50

fix OV3660 zoom mode

1ecf8db

jasaw added 2 commits May 10, 2024 10:47

reinstate aspect ratio via imageSize

9189a2a

Changed OV5640 full frame size to match datasheet

19faf30

jasaw added 2 commits May 29, 2024 01:34

Update cam vflip param page

a560b2e

Merge remote-tracking branch 'upstream/rolling' into ov5640_support

4031068

jasaw added 3 commits August 27, 2024 00:57

Merge branch 'rolling' into ov5640_support

ea098c5

fix typo: camdenoise, not camsdenoise

19f2667

fix compile errors

bdf4a30

caco3 added the Release16.0.0 label Aug 26, 2024

caco3 merged commit 7225792 into jomjol:rolling Aug 29, 2024
6 checks passed

caco3 mentioned this pull request Sep 29, 2024

Prepare next release (#3267) #3270

Merged

Slider0007 mentioned this pull request Nov 11, 2024

feat(hardware): Support camera model OV5640 + Enhanced digital zoom Slider0007/AI-on-the-edge-device#189

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add support for OV5640 camera #3063

Add support for OV5640 camera #3063

jasaw commented May 6, 2024 •

edited

Loading

caco3 commented May 6, 2024

jasaw commented May 6, 2024

SybexX commented May 6, 2024

jasaw commented May 7, 2024

SybexX commented May 7, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 9, 2024 •

edited

Loading

SybexX commented May 9, 2024 •

edited

Loading

jasaw commented May 9, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 10, 2024

SybexX commented May 11, 2024 •

edited

Loading

jasaw commented May 27, 2024

SybexX commented May 28, 2024

jasaw commented Jun 3, 2024

jasaw commented Jul 12, 2024

caco3 commented Aug 25, 2024

SybexX commented Aug 26, 2024

jasaw commented Aug 26, 2024

caco3 commented Aug 26, 2024

SybexX commented Aug 26, 2024

jasaw commented Aug 28, 2024

Pferdebockwurst commented Sep 14, 2024

jasaw commented Sep 18, 2024

Slider0007 commented Nov 11, 2024

SybexX commented Nov 11, 2024

Add support for OV5640 camera #3063

Add support for OV5640 camera #3063

Conversation

jasaw commented May 6, 2024 • edited Loading

caco3 commented May 6, 2024

jasaw commented May 6, 2024

SybexX commented May 6, 2024

jasaw commented May 7, 2024

SybexX commented May 7, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 9, 2024 • edited Loading

SybexX commented May 9, 2024 • edited Loading

jasaw commented May 9, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 9, 2024

SybexX commented May 9, 2024

jasaw commented May 10, 2024

SybexX commented May 11, 2024 • edited Loading

jasaw commented May 27, 2024

SybexX commented May 28, 2024

jasaw commented Jun 3, 2024

jasaw commented Jul 12, 2024

caco3 commented Aug 25, 2024

SybexX commented Aug 26, 2024

jasaw commented Aug 26, 2024

caco3 commented Aug 26, 2024

SybexX commented Aug 26, 2024

jasaw commented Aug 28, 2024

Pferdebockwurst commented Sep 14, 2024

jasaw commented Sep 18, 2024

Slider0007 commented Nov 11, 2024

SybexX commented Nov 11, 2024

jasaw commented May 6, 2024 •

edited

Loading

jasaw commented May 9, 2024 •

edited

Loading

SybexX commented May 9, 2024 •

edited

Loading

SybexX commented May 11, 2024 •

edited

Loading